Mackie Thump15 1000 W 15" Powered Loudspeaker - New in Box
SKU:
$349.99
$349.99
Features:
32 Hz - 23 kHz (-10 dB)
Horizontal Coverage Angle 90˚
Vertical Coverage Angle 60˚
Maximum SPL 126 dB SPL @ 1 m
Compression Driver 1.4' (36 mm)
Diaphragm Titanium (tweeter)
Magnet Ferrite
Woofer Diameter 15.0" (381 mm)
Cone Material Paper (woofer)
Rated Power 500 W RMS, 1000 W peak (overall)
400 W RMS, 800 W peak (LF)
100 W RMS, 200 W peak (HF)
Amplification Class D (LF)
Class AB (HF)
Input Female XLR / 1/4" combo balanced
Input Impedance 20 k balanced bridging, 10 k unbalanced
Thru Male XLR balanced
Level Control Rotating knob, 0 dB at center
Sensitivity +4 dBu for full output (level control @ center)
-36 dBu for full output (level control @ max)
Crossover Type 24 dB / octave
Crossover Frequency 3 kHz
Equalization Low Frequency EQ: ±6 dB @ 80 Hz, shelving
Mid Frequency EQ: ±6 dB sweepable from 100 Hz to 8 kHz
High Frequency EQ: ±6 dB @ 12 kHz, shelving
Power US detachable line cord: 100 – 120 VAC, 50 – 60 Hz, 130W
Input Protection Peak and RMS limiting, power supply and amplifier thermal protection
LED Front / rear power ON, rear OL (overload)
Construction Basic Design: Trapezoidal
Mounting Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the Thump15 loudspeaker
Dimensions 27.6 x 16.8 x 15.5" (702 x 427 x 394 mm)
Weight 33.2 lb (15.1 kg)
- Class-D amplification
- 15" high-output woofer
- 1.4" titanium dome compression driver
- Precision 2-way crossover
- Transducer time alignment
- System protection / limiting
- 3-band EQ with sweepable mid to dial in your sound
- Mic/line input allows direct connection of microphone
- Flexible mounting options including tripod and pole-mounting
- Angled design perfect for use as a stage monitor
- Rugged polypropylene construction designed for heavy use
- Weight: 33.2 lb (15.1 kg)
Specs:
Frequency Response 39 Hz - 20 kHz (-3 dB)32 Hz - 23 kHz (-10 dB)
Horizontal Coverage Angle 90˚
Vertical Coverage Angle 60˚
Maximum SPL 126 dB SPL @ 1 m
Compression Driver 1.4' (36 mm)
Diaphragm Titanium (tweeter)
Magnet Ferrite
Woofer Diameter 15.0" (381 mm)
Cone Material Paper (woofer)
Rated Power 500 W RMS, 1000 W peak (overall)
400 W RMS, 800 W peak (LF)
100 W RMS, 200 W peak (HF)
Amplification Class D (LF)
Class AB (HF)
Input Female XLR / 1/4" combo balanced
Input Impedance 20 k balanced bridging, 10 k unbalanced
Thru Male XLR balanced
Level Control Rotating knob, 0 dB at center
Sensitivity +4 dBu for full output (level control @ center)
-36 dBu for full output (level control @ max)
Crossover Type 24 dB / octave
Crossover Frequency 3 kHz
Equalization Low Frequency EQ: ±6 dB @ 80 Hz, shelving
Mid Frequency EQ: ±6 dB sweepable from 100 Hz to 8 kHz
High Frequency EQ: ±6 dB @ 12 kHz, shelving
Power US detachable line cord: 100 – 120 VAC, 50 – 60 Hz, 130W
EU detachable line cord: 220 – 240 VAC, 50 – 60 Hz, 130W
AC connector: 3-pin IEC 250 VAC, 10 A male
Power supply type: switchmode
Operating temperature: 0 - 40˚ C
Extended ambient temperature: 32 - 104˚ F
Input Protection Peak and RMS limiting, power supply and amplifier thermal protection
LED Front / rear power ON, rear OL (overload)
Construction Basic Design: Trapezoidal
Cabinet: Polypropylene
Finish: Textured
Handles: One on each side, one on top
Grille: Perforated metal with weather-resistant coating
Monitor Angle: 45˚
Mounting Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the Thump15 loudspeaker
Dimensions 27.6 x 16.8 x 15.5" (702 x 427 x 394 mm)
Weight 33.2 lb (15.1 kg)
1 available
