Yorkville E10P 350 Watt Powered FOH/Monitor Combo - New in Box
The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety of pro-audio applications. Innovative processing is built-in to ensure optimum performance and clarity.
Built for maximum versatility, the E10P input section will easily handle microphone or line level inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the E10P can adapt easily to any audio application including use as a front-of-house PA loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and playback system (no additional mixer required).
A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and linear high-frequency response powers the 1-inch horn. An on-board active DSP based crossover ensures that the woofer and horn operate optimally while protecting the high quality speaker components.
The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium magnet, a silky-smooth 1-inch horn and driver and an enclosure built from voidless 15mm multi-ply Baltic birch for light weight with classic Elite ruggedness. That durability is engineered into the multi-angle enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or horizontally as a stage monitor. For added convenience, the E10P easily converts between 120VAC, 230VAC or 240VAC.
Active or PassiveActive
Program Power (Watts)325 Watts (650 Watts Peak)
Max SPL (dB)129dB Peak (123dB Continuous)
Frequency Response (Hz +/- 3dB)65 - 20k
Crossover Frequency (Hz)1500
Driver Configuration10-inch / 1-inch
HF Dispersion (°H x °V)100 x 25
HF ProtectionPeak and Average Limiting
LF ProtectionExcursion, RMS
Power CableRemovable IEC
Power Consumption (typ/max)120VA / 200VA
Inputs1 Combijack (XLR / 1/4-inch)
Input Impedance (Bal/UnBal)4k ohms / 2k ohms
Input Sensitivity (Vrms Sine)Line in 1.4 at center, 0.35 at max
EQ ControlsBass, Treble
LimiterPeak and Average limiting on horn and woofer
LED IndicatorsPower, Clip
Bar HandlesOne Side
Flying Hardware5 (2 Top, 2 Bottom, 1 Pullback)
Pole Mount Adapter (1 3/8"-3.5cm)Yes
Enclosure Materials15mm (5/8-inch) 11-ply Russian Birch
Covering / FinishBlack Ozite (Carpet)
Optional Covering / FinishesBlack Ultrathane Paint (E10PB)
Dimensions (DWH xbackW, inches)12 x 13 x 18.5 x 5.5
Dimensions (DWH xbackW, cm)30 x 33 x 45 x 14
Weight (lbs/kg)34 / 15.5